EAN / GTIN test e.g. for ALDI 3B verification according to ISO/IEC 15416, ISO/IEC 15420

From now on we offer our customers the service to check EAN 8 and EAN 13 codes metrologically. This is important, for example, if you deliver articles for ALDI or HOFER, for which you have to provide proof of readability according to the so-called “3B” standard or better. You can order such an EAN GTIN barcode test report here in our shop.

Proof.de Test report according to ISO/IEC 15416 / ISO/IEC 15420 according to 3B criteria e.g. for barcodes for ALDI and Hofer. The test report is created on the same day and sent to you as a PDF or by post.

For this purpose we check your EAN or GTIN code with a modern REA Check ER barcode checking device and prepare a test report according to ISO/IEC 15416 and ISO/IEC 15420:

  • Symbol contrast
  • Edge Contrast
  • Modulation
  • Rmin/Rmax
  • Defects
  • Decodability
  • Rest area Left
  • Rest area Right
  • Bar deviation
  • Code length

Other optional parameters are also checked:

  • PCS (SC)
  • Bright value (Rmax)
  • Bar
  • Gap
  • Mean value
  • Z-Module
  • Size
  • MF
  • CPI

For example, in the “Size” field you can see directly whether your code corresponds to the size SC2 preferred by ALDI, for example. We have attached an exemplary evaluation above.

For the measurements we need original packaging with your printed EAN / GTIN codes. All codes will be checked on the day of their arrival and the test reports will be sent to you the same day.

Related Posts

Epson launches new generation of proof printers SureColor SC-P9500

In late 2019, Epson will present its new generation of proof printers: the Epson SureColor SC-P9500 and SC-P7500 proof printers.

Epson has incorporated many improvements into the new printer generation. For example, fully loaded print heads now work in the new printers, which can finally handle photo black, matt black and the two grey tones LightGray and LightLightGray as well as the colours orange, green and violet simultaneously in one print head. For cyan and magenta there are also the light variants light-cyan and light-magenta, so that besides yellow, cyan and magenta, 12 full colours are available in the print head. The printer uses the new UltraChrome Pro12 ink set, which could possibly bring some detail improvements to the classic K3 inks, although nothing more is known about this yet.

Continue reading

Proof GmbH is now four times Fogra and Fogra “Spot cert” certified

Fogra Zertifizierung Proof GmbH 2019 Contract Proof Creation 33246

This year we have again submitted proofs for Fogra certification. We thus prove that we not only deliver outstanding proof quality through internal quality controls and checks, but that the quality of our proofs is also confirmed by an external body. We have therefore had proofs certified for the seventh year in succession.

In 2019 we have made two innovations in Fogra certification.

  • We were certified for the first time for the new standard Fogra 54
  • We have also carried out a certification for PANTONE spot colours for all four printing conditions, the “Spot cert”. We have certified the spot colours PANTONE 2270 C, PANTONE 151 C and PANTONE Cool Gray 6 C for the proof standards ISOCoatedV2, PSOCoatedV3 and PSOsc-b_paper_v3 and PANTONE 2270 U, PANTONE 151 U as well as PANTONE Cool Gray 6 U for the standard PSOUncoatedV3

The quality of our prints and our spot colour reproduction of the PANTONE colours was confirmed by Fogra for all four proof standards.

Proof.de Fogra Prüfzertifikat für Fogra Zertifizierung und Spot cert Sonderfarbzertifizierung

The complete 14-page Fogra test report can be downloaded here.

These new certifications have been implemented on the current software revision Fiery XF 7.1.3 and have been applied to the papers EFI Gravure Proof Paper 4245 Semimatt, EFI Proof Paper 8245OBA Semimatt and EFI Proof Paper 8175OBA Matt.

Related Posts