Categories
- Basics
- Colour Deviation Tables of Spot Colours
- FAQ
- Frequent Questions About Proofing
- Gamut and Colour Profiles
- Layout Tips and Tricks
- Light and Standardized Lighting
- Pantone and HKS
- PDF/X-4 and Other PDF/X Standards
- Process Standard Offset Printing
- Proof GmbH
- Proof Knowhow
- Proof of EAN / GTIN Codes for Large Retailers like ALDI and HOFER.
- Proof Paper and Substrates
- Proof Profiles
- Proof Software and Technology
Tags
Proof GmbH: First Fogra 51 and Fogra 52 certified company worldwide
Proof GmbH has again been certified by Fogra in September 2015, this time for the standards Fogra 51 (PSOCoated_v3), Fogra 52 (PSOuncoated_v3) and Fogra 39 (ISOcoatedv2).
The Proof GmbH has thus reaffirmed it’s quality by the strict criteria of Fogra. The tests Fogra conducted went far beyond the pure colorimetric readout of a media wedge. The special proofs for Fogra were evaluated among the following criteria:
- Color accuracy of the Ugra / Fogra media wedge CMYK 3
- Overall color accuracy and gamut
- Uniformity and homogeneity of the proofsProof GmbH has again been certified by Fogra in September 2015, this time for the standards Fogra 51 (PSOCoated_v3), Fogra 52 (PSOuncoated_v3) and Fogra 39 (ISOcoatedv2).
- Color and gloss of the proofing papers used
- Tonal range and tonality
- Register and resolution
- Status information on the proof
- Tonal values
The color matching our proofs submitted for the test was confirmed by Fogra with date of September 24, 2015. The Proof GmbH is thus the world’s first company that has certification for the production of contract proofs on a Fogra 51 and Fogra 52.
We are very pleased that our preparation and the efforts of the past few months were rewarded by a successful certification. You can order Fogra51/52 proofs in our proofing shop Order Fogra 51 / Fogra 52 Proofs (PSOCoatedV3 and PSOUncoatedV3).
The full, 12-page report from Fogra can be downloaded here:
Fogra certification report on Proof GmbH of 2015 No. 29712
Fogra 51 and 52: The new printing conditions start in September 2015
With long delay, the new printing conditions Fogra Fogra 51 and 52 – PSOCoatedV3 and PSOUncoatedV3 – will be presented at the end of September and finally come into practice. The German bvdm invites together with Fogra and ECI to a joint “kick-off” of the new printing conditions in the “Hochschule der Medien” in Stuttgart.
On Wednesday, the 30th of September 2015 from 10 o’clock representatives of the associations will introduce in the university the innovations, Karl Michael Meinecke wrote of the ECI mailing list.
In this kick-off the new, jointly developed printing conditions and to implement the ISO 12647-2:2013 are presented to printing and media professionals. Attendance is expected to be free, but registration with name and company to the email address ks@bvdm-online.de is requested. The event takes place at the HdM in auditorium i003 in the Nobel Straße 10, D-70569 Stuttgart (Vaihingen) in the Stuttgart Media University.
Fogra51 and Fogra52: A difficult start
The launch of Fogra51 and Fogra52 had been marked by delays and disruptions. Large series of measurements had to be discarded after testing, measurement technology as the new SpectroProofer ILS 30 or new proofing papers were delivered only with great delay. Several seminars on how to manage the change to the new ISO standards in the Fogra are running since late last year with numerous participants in full swing – only the new standards were still not in sight. Now there is at least the kick-off date at the end of September in sight.
Cirtainly, all involved representatives of associations and interested companies were often reminded of the negative model of the US standardization bodies:
The IDEAlliance had presented in 2013 probably too hastily developed new printing conditions for GRACol 2013 and SWOP 2013, but so far they hardly play any role in practice. Why? Even the IDEAlliance open most their publications on the new standards with the tenor: “If you are not extremely color-critical, there is no reason to change from the old standards to the new ones … Conclusion: Please stay with their established, old workflow with profiles from 2006 … we are currently working on numerous ‘supplements’ …”
PSOCoatedV3 and PSOUncoatedV3: What definitely comes
But it is clear: The new standards will bring many changes to companies in printing and prepress: The individual changes in detail: (more…)
New Proof papers for Fogra51 and Fogra52 in use
Three weeks ago, we have introduced two new proofing papers for the proof of Fogra 51 and Fogra 52 Beta standard and other color standards, that require proof papers with optical brighteners:
EFI Proof Paper 8245 OBA Semimatte
EFI Proof Paper 8175 OBA Matte
A proof for coated papers with optical brighteners, we offer on semi matte EFI 8245 OBA semimatte with 245 gr / sqm. The EFI Proof Paper 8245OBA Semimatte has been specifically designed for proofing white and brightened, coated papers. The white point of this semi matte paper is very close to the values of the FOGRA51 profile and thus allows proofing of FOGRA51 with virtually no paper white simulation at all. It is also well suited for simulating paper conditions PC1 according to ISO 12647-2:-2013.
EFI Proof Paper 8245 OBA Semimatt
Weight: 245 g / sqm
Thickness: 245 microns
Opacity:> 95%
Gloss: 22%
CIE L * a * b * (M0): 95.8 | 0.9 | -4.3
CIE L * a * b * (M1): 96.0 | 1.1 | -5.6
For Proofs on uncoated papers with optical brighteners, we offer proofing on matte EFI 8175 OBA matte with 175gr / sqm. The EFI Proof Paper 8175OBA Matte has been specifically designed for uncoated proof standards. It is highly brightened and very suitable for proofing of Fogra52.
EFI Proof Paper 8175 OBA Matte
Weight: 175 g / m²
Thickness: 230 microns
Opacity: 97%
Gloss: 5%
CIE L * a * b * (M0): 96.8 | 2.5 | -7.7
CIE L * a * b * (M1): 97.0 | 3.0 | -10.8
Fogra 51 and Fogra 52 Beta Proofs available
By switching to the new Fiery XF 6.1 and the use of the new X-Rite SpectroProofer ILS-30 measuring instruments, we are now able to proof the current beta versions of the new printing standards Fogra 51 and Fogra 52.
Since the current proofing profiles are available only in preliminary beta versions, the versions are of course not color binding and legally binding. Nevertheless, interested agencies and printers can get a picture of the current state of development and evaluate the coming changes of the OBA proofing papers used better match the colors of the new proofing standards.
We have created a new category in our Proof.de Store:
Fogra 51 / Fogra 52 Beta Proofs
The Fogra 51/52 Beta proofs are listed as follows:
Proof profile Coated:
PSO_Coated_v3_ECI Practice Fred15_Oct2014.icc
Proof profiles Uncoated:
PSO_Uncoated_v3_eci_Fred15-July2014.icc
PSO_Uncoated_blueish_v3_ (ECI) -Fred15-July.icc
Software: Fiery XF 6.1
Proof printer: EPSON 7900/9900
Measurement: Epson / X-Rite SpectroProofer ILS30
Measuring standard: M1 with UV
Proof Paper Coated: EFI Proof Paper 8245OBA Semimatt 245gr / sqm
Proof Paper Uncoated: EFI Proof Paper 8175OBA Matt 175gr / sqm
Proof.de updated its proofing Software to Fiery XF 6.1
Proof.de has updated its proofing software to Fiery XF Proofing 6.1 and so successfully finished preparations for the production of proofs in the upcoming Fogra 51 and Fogra 52 color standards. The new software version also supports the now available new Spektroproofer ILS-30 made by X-Rite, which is able to measure in the measurement modes M0, M1 and M2.
The color profiles for the automated production of proofs and proof verification Fogra51 and Fogra52 will have to me measured in the new M1 standards, as well as the 2013 Versions of SWOP and GRACoL.
Proof GmbH also updated their RIP to Adobe PDF Print Engine (APPE) version 3.1. and updated some PANTONE Plus color libraries as well.
Fogra Fogra 51 and 52: No Start in sight.
Fogra Fogra 51 and 52, optical brighteners and the new standards for offset printing and proofing are currently on everyone’s lips. In the proof area we still see only announcements and beta versions, but no real solutionsby now. In 2013 the reorganization of ISO 12647-2 was adopted for offset printing, but according to ECI the earliest “expected recommendation on the implementation of the new ISO 12647-2 as well as the provision of appropriate handouts and instruments’ will be in 2015. The current status of Fogra 51 and Fogra 52 from our perspective:
Color profiles:
- Fogra Fogra 51 and 52 have completed the beta phase at the Fogra in May 2014 and were forwarded to the ECI. The there in the project “fred15” compiled information and downloads are but from March, July to October 2014, but since then there has been no more news on the new standards. So there is currently no date for the release of the final profiles, handouts and tools foreseeable. Fogra, ECI, bvdm and UGRA continue to work together on the new standards.
Proof Papers:
- ONE Technologies announced in May 2014, the certified proofing paper “ONE Proof Paper 51 SATIN” on … that in November is not yet available anywhere.
- GMG announced in October, the proofing paper “GMG Proof semimatte 250 OBA”, which to this day is also available anywhere.
- Also working on new proofing substrates is EFI, but naming, pricing and release dates are not known.
Measuring technology:
- Epson announced in August to deliver from 1 September 2014 all Epson SpectroProofer measuring devices with the new measuring head ILS 30 only. Unfortunately, the new SpectroProofer is not yet commercially available as an accessory.
- While all previous sources reported that the new SpectroProofer – Although Fogra 51 and 52, ie M1 and M2 capable, can not measure ISOcoatedv2 or M0. EFI with Fiery XF 6.1 and the SpectroProofer ILS 30 support all measurement modes, ie Fogra 51 and 52 and ISOcoatedv2 simultaneously … unfortunately is neither Fiery XF 6.1. previously available nor the SpectroProofer … but according to EFI they are currently testing all 3 modes … M0, M1 and M2 with the new SpectroProofer … that sounds promising. (more…)
Current Proof Standards 2020
Offset and Newsprint
ISO Coated v2 (ECI) / ISO Coated v2 300% (ECI)
Profile: ISOcoated_v2_eci.icc
Standard for glossy and matte coated paper
Paper: Types 1 and 2, gloss and matte coated
Tone value increase curves A (CMY) and B (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA39L
ISOUncoated
Profile: ISOUncoated.icc
Standard for uncoated white natural paper
Paper: paper grade 4, uncoated white offset, dot gain curves C (CMY) and D (K) from ISO 12647-2: 2004
Characterisation Data: FOGRA29L
PSOCoatedV3 / Fogra 51
Profile: PSOcoated_v3.icc
The successor of ISOCoatedV2 for glossy and matte coated paper with moderate optical brighteners
Paper: paper type 1, glossy and matte coated paper with moderate optical brighteners (8-14 DeltaB according to ISO 15397)
Tone value increase curve A (CMYK) according to ISO 12647-2:2013
Paper white: CIELAB=95;1,5;-6
Characterisation Data: Fogra51 / Fogra 51 Spectral (M1)
PSOuncoated_v3 / Fogra 52
Profile: PSOuncoated_v3_FOGRA52.icc
The successor of PSOUncoated for uncoated, wood-free natural paper with many optical brighteners
Paper: Paper type 5, wood-free uncoated, with high OBAs (more than 14 DeltaB according to ISO 15397)
Tonal value increase curves C (CMYK) according to ISO 12647-2:2013
Paper white: CIELAB=93.5;2.5;-10
Characterisation Data: PresumablyFogra52L (M1)
PSO Uncoated ISO12647 (ECI)
Profile: PSO_Uncoated_ISO12647_eci.icc
The successor of ISOUncoated
Paper: Type 4, uncoated white offset
Tone value increase curves C (CMY) and D (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA47L
PSO LWC Improved (ECI)
Profile: PSO_LWC_Improved_eci.icc
Improved LWC paper, glossy coated, successor of ISO Web Coated
Paper: Paper type 3, improved gloss coated (LWC)
Tone value increase curves B (CMY) and C (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA45L
PSO LWC Standard (ECI)
Profile: PSO_LWC_Standard_eci.icc
LWC paper standard, glossy coated
Paper: Paper type 3, standard glossy coated (LWC)
Tone value increase curves B (CMY) and C (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA46L
ISO Web Coated
Profile: ISOwebcoated.icc
LWC paper standard, glossy
Paper: Paper grade 3, standard glossy coated (LWC), dot gain curves B (CMY) and C (K) from ISO 12647-2: 2004
Characterisation Data: FOGRA28L
ISO Uncoated Yellowish
Profile: ISOuncoatedyellowish.icc
Uncoated natural paper slightly yellowish (chamois)
Paper: Type 5, uncoated yellowish offset
Tone value increase curves C (CMY) and D (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA30L
SC Paper (ECI)
Profile: SC_paper_eci.icc
Paper: SC (Super Calendered) Paper
Tone value increase curves B (CMY) and C (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA40L
PSO SC-B Paper v3
Profile: PSOsc-b_paper_v3_FOGRA54.icc
SC-B Paper, Super calendered Papier, satin-finished
Paper: Commercial offset, SC-B paper (super-calendered, satin), printing condition PC6
Tone value increase curve 2013-B, white measurement base.
Characterisation Data: FOGRA54
PSO MFC Paper (ECI)
Profile: PSO_MFC_paper_eci.icc
Paper: MFC, Machine finished coating
Tone value increase curves B (CMY) and C (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA41L
PSO SNP Paper (ECI)
Profile: PSO_SNP_paper_eci.icc
Newsprint
Paper: SNP, Standard newsprint, heatset web offset printing
Tone value increase curves C (CMY) and D (K) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA42L
WAN-IFRAnewspaper 26v5
Profile: WAN-IFRAnewspaper26v5.icc
Colour space: Primary and secondary colours according to ISO 12647-3: 2013
Dot gain: 26%
Maximum paint application: 220%
Maximum GCR: Long black with an early black start
ISONewspaper 26v4
Profile: ISONewspaper26v4.icc
Newspaper
Paper: paper type SNP, standard newsprint, heatset web offset, dot gain curves C (CMY) and D (K) from ISO 12647-2: 2004
Characterisation Data: IFRA26
PSO Coated NPscreen ISO12647 (ECI)
Profile: PSO_Coated_NPscreen_ISO12647_eci.icc
glossy and matte coated paper, FM screen
Paper: Paper types 1 and 2, glossy and matt coated paper, non-periodic screen (NPscreen), 20 µm,
Tone value increase curve F (CMYK) from ISO 12647-2:2004
Characterisation Data: FOGRA43L
PSO Coated 300% NPscreen ISO12647 (ECI)
Profile: PSO_Coated_300_NPscreen_ISO12647_eci.icc
glossy and matte coated paper, FM screen
Paper: type 1 and 2, gloss and matte coated
non-periodic screening (NPscreen), 20 μm
Tone value increase curve F (CMYK) as defined in ISO12647-2:2004
Characterisation Data: FOGRA43L
PSO Uncoated NPscreen ISO12647 (ECI)
Profile: PSO_Uncoated_NPscreen_ISO12647_eci.icc
Uncoated white natural paper, non-periodic screening (NPscreen), 30 μm
Paper: type 4, uncoated white offset
Tone value increase curve F (CMYK) as defined in ISO 12647-2:2004
Characterisation Data: FOGRA44L
Improved Newsprint, INP / PSO INP Paper (ECI)
Profile: PSO_INP_Paper_eci.icc
Commercial and specialty offset, INP paper (improved news print), positive plates
Paper: improved newsprint
Tone value increase curves C (CMY) and D (K), white measurement base
Characterisation Data: FOGRA48L
PSO Coated v2 300% Glossy laminate (ECI)
Profile: PSO_Coated_v2_300_Glossy_laminate_eci.icc
Commercial offset printing, positive copy, AM screen with 60-80 lines/cm, with subsequent gloss foil lamination (typical OPP gloss foil 12-15 μm), white measurement base.
The profile is consistent with the old profiles ISOcoated_v2_eci.icc and ISOcoated_v2_300_eci.icc and shows the matching gloss finished result.
Tone value increase curves A (CMY) and B (K) according to ISO 12647-2:2004
Characterisation Data: FOGRA50L
PSO Coated v2 300% Matte laminate (ECI)
Profile: PSO_Coated_v2_300_Matte_laminate_eci.icc
Commercial offset printing, positive copy, AM screen with 60-80 lines/cm, with subsequent matt film lamination (typical OPP matt film 15 μm with medium opacity ~70%, i.e. brightening ΔL* = 6 on black solid tone after finishing), white measurement base.
The profile is consistent with the old profiles ISOcoated_v2_eci.icc and ISOcoated_v2_300_eci.icc and shows the matching matt-finished result.
Tone value increase curves A (CMY) and B (K) according to ISO 12647-2:2004
Characterisation Data: FOGRA49L
eciCMYK (Fogra 53) – CMYK exchange colour space
Profile: eciCMYK.icc
FOGRA53 is a CMYK exchange colour space and is used for colour communication in print production.
eciCMYK_v2 (Fogra 59) – CMYK exchange colour space New 2020!
Profile: eciCMYK_v2.icc
eciCMYK_v2 (Fogra 59) is the successor of eciCMYK (Fogra 53).
Heaven42
The absolute white tone opens up the greatest scope of colours for design and printing afforded by any coated paper worldwide. The perfect foundation for extreme contrasts and combination with ultra white natural papers. The absolutely white paper shade of heaven 42 impacts on the printing process as well as on the pre-press stage. With the same colouring and dot gain, the printed image can look significantly colder if separation remains unchanged (e.g. with
ICC-profile “IsoCoated_v2”).
We proof Heaven42 on proof paper with optical brighteners and measure the Proof in M1 Standard. Please note: Our Heaven42 proofs represent a good simulation of the original Heaven42 ICC Profile, but are not – as an ISOcoatedv2 Proof – colouraccurate and legally binding.
Scheufelen offers two ICC-Profiles for download, we proof the colour profile of Heidelberger Druck (“_HD”).
Profile: Heaven42_AM_U280_K98_G80_HD.icc (Heidelberger Druck)
Ink Coverage: ~280 % (U)
Black: GCR , 80 % (G)
Black Generation: 98 % (K)
Proofpaper: EFI Proof Paper 8245 OBA Semimatt
Characterisation Data: Made from Reference Data
Measuring method: M1 with optical brighteners (OBAs)
PaC.Space
Profile: PaC.Space_CMYK_gravure_V1a.icc
PaC.Space is the first common color standard for packaging gravure printing, which enables to process an interface from the supplied prepress data or printer-specific requirements.
Paper: Coated substrates and films for packaging gravure
Characterisation Data: FOGRA_PaCSpace_MKCheck11
Rotogravure Profiles
ECI Rotogravure profiles for the Process Standard Rotogravure (PSR)
PSR LWC Plus V2 M1 v2 (2019)
Profile: PSR_LWC_PLUS_V2_M1_v2.icc
The Successor of PSR LWC Plus V2 (PSR_LWC_PLUS_V2_PT.icc)
Paper: Roll gravure, LWCplus glossy coated
Measuring base: unprinted LWCplus paper
Characterisation Data: PSR_LWC_PLUS_V2_M1
PSR LWC Plus V2 (2009)
Profile: PSR_LWC_PLUS_V2_PT.icc
The successor of HWC
Paper: Improved LWC (light weight coated) paper
Characterisation Data: ECI_PSR_LWC_PLUS_V2
PSR LWC Standard V2 M1 (2019)
Profile: PSR_LWC_STD_V2_M1.icc
The successor of PSR LWC Standard V2
Paper: Rotogravure, LWC
Measuring base: unprinted LWC paper (self backing)
Charakterisierungsdaten: SR_LWC_STD_V2_M1
PSR LWC Standard V2 (2009)
Profile: PSR_LWC_STD_V2_PT.icc
Paper: LWC (light weight coated) paper
Characterisation Data: ECI_PSR_LWC_STD_V2
PSR SC Plus V2 M1 (2019)
Profile: PSR_SC_PLUS_V2_M1.icc
The successor of PSR SC Plus V2
Paper: Rotogravure, SC Plus
Measuring base: Unprinted SC Plus paper
Characterisation Data: PSR_SC_Plus_V2_M1
PSR SC Plus V2 (2009)
Profile: PSR_SC_PLUS_V2_PT.icc
Paper: whiter super calandered paper
Characterisation Data: ECI_PSR_SC_Plus_V2
PSR SC Standard V2 M1 (2019)
Profile: PSR_SC_STD_V2_M1.icc
The successor of PSR SC Standard V2
Paper: Roll gravure, SC paper
Measurement document: Unprinted SC paper
Characterisation Data: PSR_SC_STD_V2_M1
PSR SC Standard V2 (2009)
Profile: PSR_SC_STD_V2_PT.icc
Paper: super calandered paper
Characterisation Data: ECI_PSR_SC_STD_V2
PSR MF V2 M1 (2019)
Profile: PSR_MF_V2_M1.icc
Paper: Rotogravure, paper type MF or INP, 55 g/m2
Measuring base: unprinted MF or INP paper
Characterisation Data: PSR_MF_V2_M1
PSR News Plus
Profile: PSRgravureMF.icc
PSRgravureMF is now reffered to as News Plus
Paper: Paper News Plus
Characterisation Data: PSRgravureMF_ECI2002
US / International Proof Profiles
GRACoL2006_Coated1v2
Profile: GRACoL2006_Coated1v2.icc
GRACol interpretation of ISO 12647-2.
Paper: Type 1 and 2, glossy and matt coated paper
Dot gain curves: NPDC (Neutral Print Density Curves)
Characterisation Data: GRACoL2006_Coated1, a derivation from Fogra 39
SWOP2006_Coated3v2
Profile: SWOP2006_Coated3v2
SWOP interpretation of ISO12647-2 for web offset printing on thin coated paper.
Paper: Thin, coated paper
Tonwertzunahmekurven: NPDC (Neutral Print Density Curves)
Characterisation Data: SWOP2006_Coated3, a derivative of Adobe USWebCoated v2
SWOP2006_Coated5v2
Profile: SWOP2006_Coated5v2
Other SWOP interpretation of ISO12647-2 for web offset printing on thin coated paper
Paper: Thin, coated paper with a slightly different white tone to SWOP2006_Coated3V2
Dot gain curves: NPDC (Neutral Print Density Curves)
Characterisation Data: SWOP2006_Coated5, a derivative of Adobe USWebCoated v2
Japan Color 2011 Coated
Profile: JapanColor2011Coated.icc
The new standard of Japan Printing Machinery Association (JPMA).
Characterisation Data: JapanColor
Japan Color 2001 Coated
Profile: JapanColor2001Coated.icc
Printing process definition: ISO 12647-2:1996, sheet-fed offset printing, positive plates
Paper: Type 1, (coated, 105 gsm), screen frequency 69/cm.
SWOP 2013 C3
Profile: SWOP2013_CRPC5.icc or SWOP2013C3-CPRC5.icc
The profile is measured in M1 mode in consideration of optical brighteners and is printed on proofing papers with optical brighteners.
TAC: 260%
GCR: Medium+
Max K: 100%
TVI: CMY 16%, K19%
Paper: Grade #3 paper
Characterisation Data: CGATS21-2-CRPC5
GRACoL 2013 Uncoated
Profile: GRACoL2013UNC_CRPC3.icc
The profile is being measured in M1 Mode taking into account the Optical Brightening Agents in the paper.
TAC: 260%
GCR: Medium+
Max K: 100%
TVI: CMY 16%, K19%
Paper: N.N.
Characterisation Data: CGATS21-2-CRPC3
GRACoL 2013
Profile: GRACoL2013_CRPC6.icc
The profile is being measured in M1 Mode taking into account the Optical Brightening Agents in the paper.
TAC: 320%
GCR: Medium+
Max K: 100%
TVI: CMY 16%, K19,1%
Paper: N.N.
Characterisation Data: CGATS21-2-CRPC6
You can easily order proofs from our shop:
-
Proof GmbH
Gölzstraße 17
72072 Tübingen
Baden-Württemberg
Germany
© 2020 – Proof GmbH
Recent Comments