As is well known, elections are always around the corner, and the trend towards ever larger and more numerous election posters is unbroken. In the past, only Mother Nature made the landscapes colourful in spring, but today every local, state, federal and European election does so easily. Every candidate, every large or small party now has the technical and financial means to transform entire streets into a colourful sea of messages and faces. Once the photographer has captured the election candidates well in the studio, the pictures go off for retouching and then for layout.
Until a few years ago, election posters were usually produced in classic offset printing and then glued onto hardboard with paste, drilled or screwed onto roof batten stands and then attached to street lamps with wire. And if the election took place in the summer, the posters were printed in a double edition, so that in an emergency the faded prints could be pasted over and refreshed with new ones after one month for the final spurt.
Today, however, the corrugated plastic poster is becoming more and more popular, as it is supplied pre-drilled and ready to use, retains its colour for several months and can be attached to street lamps with cable ties. But how should print data be created and how should data be prepared and proofed?
All manufacturers of corrugated plastic posters and election posters known to us want proofs in ISOCoatedV2 or ISOCoatedV2 300%
Corrugated plastic posters are produced on different systems. Sometimes four colours are used, sometimes six, sometimes more colours. Therefore, there are no binding proof standards for most digital print products produced in this way.
Instead, it works the other way around: Since most of these digital printing systems have at least the colour gamut of offset printing on picture printing paper, these printing systems are based on the established colour gamut of ISOCoatedV2.
For example, Printpartner-XXL writes: “For colour-critical motifs, we therefore recommend a prepress proof on the original material or the delivery of a colour-binding proof (with media wedge and date). Data that is delivered without colour information is provided and produced with the standard profile “ISO Coated v2”. In such a case, a colour complaint cannot be accepted.
Eine Reklamation der Farbe kann in so einem Fall nicht anerkannt werden.
From our point of view, most printing specialists demand ISOCoatedV2, some like flyeralarm and wir-machen-druck ISOCoatedV2 300%. Some want black exclusively as pure black, some exclusively as CMYK 50/50/50/100 colour black … and some do not give any information about the required colour profiles … but if you don’t specify anything, you probably won’t stick to anything … so if you want to be on the safe side, you should choose a supplier with a functioning colour management system and specifications for colour profiles.
More articles related to this topic:
Proof.de is featured twice in the “Fogra Aktuell” magazine
In the current issue of Fogra News “Fogra Aktuell” Proof GmbH is involved in two places. Firstly, a summary of the Fogra report on our first FOGRA55 certification for seven-colour printing with extended colour space in CMYKOGV appeared. You can also find more information on our FOGRA55 certification on the Fogra website: https://fogra.org/en/press-releases/fogracert-erste-cpc-zertifizierung-fuer-fogra55-cmykogv-330 and on proofing.de: And secondly, there was a report on the completion of the research project for textile digital printing, FOGRA58, in which we were allowed to investigate and test the proof capability of the new textile … read more
“Digital First” often means “Colour Problems Second!”
Whether it’s a large global corporation or a small company, the following often applies to designs or redesigns today: we develop everything for digital first.
Current Proof Standards 2025
Offset and Newsprint ISO Coated v2 (ECI) / ISO Coated v2 300% (ECI) Profile: ISOcoated_v2_eci.icc Standard for glossy and matte coated paper Paper: Types 1 and 2, gloss and matte coated Tone value increase curves A (CMY) and B (K) as defined in ISO 12647-2:2004 Characterisation Data: FOGRA39L ISOUncoated Profile: ISOUncoated.icc Standard for uncoated white natural paper Paper: paper grade 4, uncoated white offset, dot gain curves C (CMY) and D (K) from ISO 12647-2: 2004 Characterisation Data: FOGRA29L PSOCoatedV3 / Fogra 51 Profile: PSOcoated_v3.icc The successor of ISOCoatedV2 for glossy … read more
Fogra60 proofs for metal decor printing available
From now on you can order proofs for metal decor printing on white sheet metal at proof.de: The ICC profile for Fogra60 is Metal-Printing_MPC1_FOGRA60.icc
Proof.de: New video online
In this short image video we – the Proof GmbH – introduce us and our work. Find out who we are and what drives us. What do you think of our short film?
New iPhone colour measuring devices: xade nano+ in test
A new generation of colour measuring devices is entering the market: in contrast to the classic measuring devices, which are available as a fully encapsulated system either as a colourimeter or as a spectrophotometer, and then supply the data to a computer via an interface or app or display it directly, the new generation of colour measuring devices consist only of lighting and software, with the optics of a modern iPhone from Apple being used as the sensor. Until now, there have been two categories of measuring devices on the … read more
Incorrect greyscale display in Adobe Photoshop and InDesign
Adobe products are ideal for image retouching and layout and handle RGB and CMYK colour profiles very well. However, when editing and retouching greyscale images, for example for a black-and-white photo book, the experience is quite different. Suddenly, images look completely different in InDesign than they do in Photoshop, and even when exporting the image to PDF, greyscale images are suddenly treated differently. This article explains where the problems lie with black-and-white images and greyscale profiles in InDesign and Photoshop layouts, and how you can work in a more ‘colour-accurate’ … read more
MYIRO-9: New Spectrophotometer from KonicaMinolta in action
Over the last few months, we at Proof.de have been thinking about further improving our already very good colour measurement technology in terms of speed and measurement precision. Relatively quickly it became clear that only two devices would come into question: The KonicaMinolta MYIRO-9, the successor of the former FD-9, or the X-Rite ISIS 2 XL. The starting point: Since we at Proof GmbH have 5 proofing devices, the calibration of targets for profile optimisation is a time-critical undertaking for us. Therefore, we had been looking around for an upgrade of … read more
Precise proofing of tonal values of spot colours
In recent weeks, there have been lengthy discussions on the Fogra digital printing mailing list as to whether a research project should be launched to define standardised tonal value gradations for spot colours. What is this all about? In the field of CMYK and seven-colour printing, the definition of clear, printable and proofable standards is well established and has been tried and tested in practice. If the paper or paper class is known and defined, a measuring standard such as M0/M1/M2 has been established and the content of optical brighteners … read more
Proofs with Digimarc EAN codes and verification
Digimarc is a digital watermark that can be used to embed information in images, videos or other media. Digimarc watermarks are invisible to the human eye, but remain recognisable to special software or devices. Digimarc is becoming increasingly popular in the packaging sector in particular, as this technology allows the digits of the EAN barcode and more to be applied invisibly to all areas of the packaging. Digimarc and EAN barcode at the supermarket checkout When scanning at the checkout, the checkout staff do not have to search for the … read more