A few days ago Fogra published the characterisation data for the new printing standards Fogra56 and Fogra57 while ECI provided the respective ICC profiles for download on the eci.org website.
FOGRA56 and FOGRA57 are the separation and printing standards for matte and glossy film lamination of “PSO Coated v3” / Fogra51 prints.
At Proof.de, with regard to the two predecessor standards Fogra49 and Fogra50 for glossy and matte film lamination of ISOCoatedV2 / Fogra39 prints, the majority of inquiries were for the standard for matte film lamination only, as this is where the greater and more difficult effects occur with regard to colour changes due to the lamination process. Particularly in the area of colour-critical prints, such as catalogues for the automotive industry, extensive tests are sometimes carried out with different film laminations in order to be able to recognise and compensate for differences between a normal matte film lamination and a scratch-resistant matte OPP lamination, for example. We also expect a higher demand for consulting and proofing for Fogra56 and Fogra57 for matte film lamination.
The European Colour Initiative ECI states on its website that the differences between different glossy films are rather small, while matte films are available in very different opacities. According to the ECI, the “average” matte film used as a reference in FOGRA56 leads to a lightening of ∆L* = 6 in the black solid tone and fits well with typical production. The lightening is lower with more transparent foils and higher with matte foils. In order to be able to assess one’s own films, the ECI recommends measuring the black solid tone before and after finishing on the same field on the same sheet.
You can download the new finishing profiles here from the ECI or from Proof.de. You can find the matching characterisation data here on the Fogra pages.
Fogra56 / PSO Coated V3 Matte Laminate
The ECI offset profile PSO_Coated_v3_Matte_laminate.icc is based on the characterisation file “FOGRA56.txt” and applies to the following printing conditions according to the international standard ISO12647-2:2013:
- Commercial offset, premium coated paper, dot gain curve 2013-A, followed by matte film lamination (typical OPP matte film 15 μm with medium opacity ~70%, i.e. lightening ΔL* = 6 on black solid after finishing), white measuring base.
- The profile is consistent with the PSOcoated_v3.icc profile and shows the matching glossy finished result.
- The profile was calculated using Heidelberg ColorToolbox 2019 with the following settings: Black length 9 (insertion point 10%), Black width 10, max. area coverage 300%, max. black 96%.
Fogra57 / PSO Coated V3 Glossy Laminate
The ECI offset profile PSO_Coated_v3_Glossy_laminate.icc is based on the characterisation file “FOGRA57.txt” and applies to the following printing conditions according to the international standard ISO12647-2:2013:
- Commercial offset, premium coated paper, dot gain curve 2013-A, followed by glossy film lamination (typical OPP glossy film 12-15 μm), white measuring pad.
- The profile is consistent with the PSOcoated_v3.icc profile and shows the matching gloss finished result.
- The profile calculation was done with Heidelberg ColorToolbox 2019 with the following settings: Black length 9 (insertion point 10%) , Black width 10, max. area coverage 300%, max. black 96%.
More articles related to this topic:
New edition of ISOCoatedV2 in M1 in sight?
Even almost 9 years after the introduction of the successor colour space PSOCoatedV3, ISOCoatedV2 / FOGRA39 is still the most widespread colour space in Europe. We at Proof GmbH count around 200 jobs from time to time for the German Printing and Media Industries Federation, among others. In the last count, proofs in ISOCoatedV2 accounted for around 68% of all proof jobs at our company. This is a clear sign of the continued widespread use of the colour space. ISOCoatedV2: From the classic colour space to the beacon of the … read more
Current Proof Standards 2024
Offset and Newsprint ISO Coated v2 (ECI) / ISO Coated v2 300% (ECI) Profile: ISOcoated_v2_eci.icc Standard for glossy and matte coated paper Paper: Types 1 and 2, gloss and matte coated Tone value increase curves A (CMY) and B (K) as defined in ISO 12647-2:2004 Characterisation Data: FOGRA39L ISOUncoated Profile: ISOUncoated.icc Standard for uncoated white natural paper Paper: paper grade 4, uncoated white offset, dot gain curves C (CMY) and D (K) from ISO 12647-2: 2004 Characterisation Data: FOGRA29L PSOCoatedV3 / Fogra 51 Profile: PSOcoated_v3.icc The successor of ISOCoatedV2 for glossy … read more
Proof GmbH 2020 once again Fogra and Fogra “Spot Cert” certified
Once again we passed the Fogra certifications and were even the first company to be certified with the Fogra “Spot cert” for Fogra59 eciCMYK-V2.
Proof GmbH: First Fogra 51 and Fogra 52 certified company worldwide
Proof GmbH has again been certified by Fogra in September 2015, this time for the standards Fogra 51 (PSOCoated_v3), Fogra 52 (PSOuncoated_v3) and Fogra 39 (ISOcoatedv2). The Proof GmbH has thus reaffirmed it’s quality by the strict criteria of Fogra. The tests Fogra conducted went far beyond the pure colorimetric readout of a media wedge. The special proofs for Fogra were evaluated among the following criteria: Color accuracy of the Ugra / Fogra media wedge CMYK 3 Overall color accuracy and gamut Uniformity and homogeneity of the proofsProof GmbH has again been certified … read more
Fogra 51 and 52: The new printing conditions start in September 2015
With long delay, the new printing conditions Fogra Fogra 51 and 52 – PSOCoatedV3 and PSOUncoatedV3 – will be presented at the end of September and finally come into practice. The German bvdm invites together with Fogra and ECI to a joint “kick-off” of the new printing conditions in the “Hochschule der Medien” in Stuttgart. On Wednesday, the 30th of September 2015 from 10 o’clock representatives of the associations will introduce in the university the innovations, Karl Michael Meinecke wrote of the ECI mailing list. In this kick-off the new, jointly developed printing conditions … read more
New SWOP and GRACoL 2013 Profiles available for proofing
Recently Proof GmbH made available in their proof online shop the new US Proof Standards of SWOP and GRACoL with their 2013 profiles. Unlike the new Fogra51 and Fogra52 profiles from their Munich colleagues, the IDEAlliance have pushed their new standards forward and published new M1-based profiles already in 2013 – M1 meaning, that the new standards are measured in consideration of optical brightening agents (OBAs), and also contain a different white point than the previous SWOP and GRACoL profiles of 2006. The release was perhaps a bit too early … read more
New Proof papers for Fogra51 and Fogra52 in use
Three weeks ago, we have introduced two new proofing papers for the proof of Fogra 51 and Fogra 52 Beta standard and other color standards, that require proof papers with optical brighteners: EFI Proof Paper 8245 OBA Semimatte EFI Proof Paper 8175 OBA Matte A proof for coated papers with optical brighteners, we offer on semi matte EFI 8245 OBA semimatte with 245 gr / sqm. The EFI Proof Paper 8245OBA Semimatte has been specifically designed for proofing white and brightened, coated papers. The white point of this semi matte paper is … read more
Fogra 51 and Fogra 52 Beta Proofs available
By switching to the new Fiery XF 6.1 and the use of the new X-Rite SpectroProofer ILS-30 measuring instruments, we are now able to proof the current beta versions of the new printing standards Fogra 51 and Fogra 52. Since the current proofing profiles are available only in preliminary beta versions, the versions are of course not color binding and legally binding. Nevertheless, interested agencies and printers can get a picture of the current state of development and evaluate the coming changes of the OBA proofing papers used better match the colors … read more
Proof.de updated its proofing Software to Fiery XF 6.1
Proof.de has updated its proofing software to Fiery XF Proofing 6.1 and so successfully finished preparations for the production of proofs in the upcoming Fogra 51 and Fogra 52 color standards. The new software version also supports the now available new Spektroproofer ILS-30 made by X-Rite, which is able to measure in the measurement modes M0, M1 and M2. The color profiles for the automated production of proofs and proof verification Fogra51 and Fogra52 will have to me measured in the new M1 standards, as well as the 2013 Versions of SWOP … read more
Fogra Fogra 51 and 52: No Start in sight.
Fogra Fogra 51 and 52, optical brighteners and the new standards for offset printing and proofing are currently on everyone’s lips. In the proof area we still see only announcements and beta versions, but no real solutionsby now. In 2013 the reorganization of ISO 12647-2 was adopted for offset printing, but according to ECI the earliest “expected recommendation on the implementation of the new ISO 12647-2 as well as the provision of appropriate handouts and instruments’ will be in 2015. The current status of Fogra 51 and Fogra 52 from … read more