An LED is a ‘light-emitting diode’ and in the graphics industry stands for the new ‘LED’ light, which has replaced older light sources such as neon tubes and tungsten lamps. Neon tubes are mainly known from the D50 or D65 standard light range. Today, LED light sources are predominantly used for standardised light in particular, as they can be spectrally adapted better and often emit a more harmonious light spectrum than neon light.
In modern standardised lighting, it is possible not only to set up standardised light for one type of light, such as D50, but also to simulate D50, D65, incandescent light and much more using several spectrally different LED lines by dimming and mixing the spectra differently in one lamp. In addition, the LED luminaires can often be dimmed, which was not possible with neon tubes.
What the industry is still waiting for are cost-effective standardised LED retrofit solutions, but these are unlikely to be long in coming. As the big players such as JUST Normlicht and GTI have dominated the market up to now, only expensive retrofits of the entire lighting unit have been offered instead of removing the old neon tubes and replacing them with new LED tubes in the same housing. At JUST, for example, replacing a small standard lighting unit with four tubes costs several thousand euros, as a completely new unit is used here and the old one has to be disposed of. Today, specialised smaller companies such as Lacuna Solutions can also offer modern and innovative, controllable standard light luminaires for new standard lighting solutions.
Today, however, LED light sources with a colour rendering index of over 98 are also available on the market, so it seems to be only a matter of time before LED retrofit solutions for D50 and D65 standard light will also be available for the slim replacement of old standard light tubes while retaining the reflectors. If the European and American suppliers do not present any solutions here, then the Chinese LED construction experts will probably take on the market and enter the market with LED retrofit tubes for standardised lighting in the near future. In any case, LED technology is already sufficiently advanced.
The most important colour management event takes place every two years in Munich: the Fogra Colour Management Symposium. Once again this year, all professionals are invited to make the pilgrimage to Munich: two days of lectures, discussions and a Bavarian evening await participants. Matthias Betz, owner of proof.de, will also be there again: for many years, he has been taking advantage of the opportunity to exchange ideas with colleagues and friends, learn about new technologies, hardware and software, and talk to colleagues from Fogra, freieFarbe, GMG and many more. In … read more
In recent weeks, there have been lengthy discussions on the Fogra digital printing mailing list as to whether a research project should be launched to define standardised tonal value gradations for spot colours. What is this all about? In the field of CMYK and seven-colour printing, the definition of clear, printable and proofable standards is well established and has been tried and tested in practice. If the paper or paper class is known and defined, a measuring standard such as M0/M1/M2 has been established and the content of optical brighteners … read more
Several errors have crept into the new PANTONE 2023 fan decks. In both the PANTONE Solid Coated and the Solid Uncoated color fans, there are colours for which the new ink formulations are incorrect. In the PANTONE Formula Guide Solid Coated fan 2023, PANTONE 107 C and PANTONE 108 C have absolutely identical ink recipes, as well as PANTONE 113 C and PANTONE 114 C. As the colors differ, this cannot be the correct. Several errors in the PANTONE Solid Uncoated fan 2023 In the PANTONE Solid Uncoated fan 2023 … read more
After Eddy Hagen pointed out in this posts, that there were some major colour deviations between the brand new PANTONE Solid Coated Guide 2023 and the previous version especially for the PANTONE 2635 C, I was curious to lookup the same colours in the new PANTONE Color Bridge Coated Guide of 2023 and compare the colours with the previous version. I measured a dE00 of 8,15 between the two colours that Eddy mentioned, which is really far apart from how accurate PANTONE colours should match between the different PANTONE guides. … read more
Adobe products are ideal for image retouching and layout and handle RGB and CMYK colour profiles very well. However, when editing and retouching grayscale images, for example for a black-and-white photo book, the experience is quite different. Suddenly, images look completely different in InDesign than they do in Photoshop, and even when exporting the image to PDF, greyscale images are suddenly treated differently. This article explains where the problems lie with black-and-white images and greyscale profiles in InDesign and Photoshop layouts, and how you can work in a more ‘colour-accurate’ … read more
At long last, we are able to fulfil a request made by many of our customers: from now on, you can register two email addresses in the Proof Shop – one for logging in and receiving status or tracking emails, and a separate one solely for receiving digital PDF invoices. Over the past few years, we have already switched many Proof customers to digital invoicing at their request, i.e. we generated a PDF invoice and then sent it manually to a second email address on file with us in the … read more
In recent years, various problems have arisen with our previous proof paper supplier. On the one hand, we sometimes had to wait more than three months for paper deliveries; on the other hand, we sometimes had significant problems with batch-to-batch discrepancies, surface defects and much more. After lengthy deliberations, we decided in December to replace all the paper. We therefore received pallets of new paper at the turn of the year, which we are now gradually incorporating into our production. There will be no hard cut, but the new papers … read more
Having missed last year’s annual conference in Dresden at the last minute due to illness, I am all the more delighted to be attending this year’s event in Darmstadt. The programme is once again very exciting and varied! I’m particularly looking forward to Dr Andreas Kraushaar’s workshop ‘Measuring in Images’, the HDR lecture by Prof. Dipl.-Ing. Florian Süßl, and the insights into ‘Perzabsolut’ from Dr Moritz Feil. As we discovered at the last Colour Management Symposium in Munich, Moritz Feil – whilst working at the Technical University of Munich – … read more
A few days ago Proof GmbH was the first company to be certified for proofing for the new 7C exchange colour space FOGRA55. Fogra has developed characterisation data for extended multicolour printing with the printing colours CMYKOGV – i.e. cyan, magenta, yellow, black (contrast), orange, green and violet – FOGRA55 as part of a research project over the past few years. The characterisation data and the ICC profile Ref-ECG-CMYKOGV_FOGRA55_TAC300.icc have been published on the Fogra website in recent weeks. We have now carried out the certification via GMG ColorProof, as … read more
RGB colour spaces are colour systems that represent different hues with the three primary colours red, green and blue. RGB colour spaces are used in digital image processing, photography and computer technology to precisely define colours. The most important RGB colour spaces and their special features are: sRGB sRGB is the most widely used RGB colour space and is used by most monitors, printers and digital cameras. It was developed by HP and Microsoft in the 1990s to create a standard for colour representation on the internet and on various … read more